Product details, compatibility and care

RZ Mask's highest-certified respirator platform. CE certified to European Standard EN 149 FFP3 — the highest European respirator certification level. 99%+ filtration efficiency. Active carbon odor and VOC reduction. Patented RZ Secure 360™ Seal. Reusable with replaceable filters. 19+ USA & International Patents. 3+ million RZ masks sold. Trusted Worlwide 

RZ Pro FFP3 — CE Certified to the Highest European Standard

The RZ Pro FFP3 is RZ Mask's highest-certified respiratory protection product. CE certified to EN 149:2001+A1:2009, it delivers 99%+ filtration efficiency combined with an active carbon layer that neutralizes odors, fumes, and VOCs — all within the patented RZ Secure 360™ Seal that eliminates gaps and air leakage. This is a certified respirator built for professionals who operate in environments where certification is required.

What Is FFP3 — and Why Does It Matter?

FFP3 is the highest level of European respiratory protection certification under EN 149:2001+A1:2009, requiring a minimum of 99% filtration efficiency of airborne particles. The RZ Pro FFP3 is CE certified to this standard — independently tested and verified. For comparison, RZ Pro FFP2 is certified to 94% filtration efficiency. Choose FFP3 for finer particles, higher-hazard environments, or where maximum certified protection is required.

Dual-Action Protection: FFP3 Filtration + Active Carbon

The RZ Pro FFP3 goes beyond particulate filtration. The included active carbon filters combine certified 99%+ particulate filtration with an activated carbon layer that neutralizes odors, smoke, and VOCs — dual-action protection in a single replaceable filter.

Key Features

  • CE Certified FFP3 — Meets European Standard EN 149:2001+A1:2009
  • 99%+ Filtration Efficiency — The highest European particulate filtration standard
  • Active Carbon Filters — Neutralizes odors, smoke and VOCs
  • RZ Secure 360™ Seal — Full perimeter seal, no gaps, no air leakage
  • Reusable Platform — Replace filters, not the respirator; cost-effective and sustainable
  • Helps Reduce Fogging — Adjustable nose clip and seal design help reduce eyeglass fogging
  • Dual One-Way Discharge Valves — Actively exhaust heat and moisture for all-day comfort
  • 19+ USA & International Patents — Engineering precision, RZ built since 2010

RZ Pro FFP3 vs RZ Pro FFP2 — Which Is Right for You?

  • RZ Pro FFP2 — CE certified, 94% filtration. Ideal for construction, woodworking, landscaping, and general industrial use.
  • RZ Pro FFP3 — CE certified, 99%+ filtration, the highest European standard. Ideal for dust, fine particulates and environments requiring maximum certified protection for FFP3 levels. 

What's Included

  • 1 x RZ Pro FFP3 Certified Respirator
  • Active Carbon Filters (see filter options below)
  • Storage Bag

Replacement Filters — Maintain Your Certified Protection

Replace filters regularly to maintain certified FFP3 filtration performance. Filters are not washable — replacement is required. Replace when breathing becomes restricted or after heavy exposure.

Looking for a Reusable Filtration Mask Instead?

If your environment does not require certified respiratory protection, the RZM3 Reusable Filtration Mask delivers 99.9% tested filtration performance in a comfortable, versatile design for woodworking, construction, sanding, and dusty work.

This is a CE certified FFP3 respirator. Not suitable for protection against radioactivity, carcinogenic substances classified as such, or biological agents of risk group 3 or higher. Consult your safety officer for appropriate PPE in those environments.

Shop matching products

Match the exact model and size before adding a replacement filter. Each item is sold separately. Product details include use instructions and any subscription options.

RZ Pro FFP3 respirators and filters

Confirm the exact certified configuration and country of use before purchasing. European classifications do not establish United States approval.

Plan the ongoing filter cost.

Keep the reusable facepiece in service according to its instructions and replace the matching filters when required. For certified respirator configurations appropriate to the same task and market, explore equipment and filter spending with the cost calculator.

Open the ROI and filter cost calculator →

The Ultimate Respiratory Solution

Introducing the RZ Pro with CE Mark & FFP3 certification—our most advanced respirator yet, built for professionals who need the highest level of protection without sacrificing comfort. FFP3 is Europe’s top-tier respiratory standard, requiring at least 99% filtration efficiency against airborne particulates, including fine dust, mists/aerosols, and biological particles such as viruses and bacteria. The RZ Pro FFP3 is engineered to meet this stringent benchmark with a secure seal, low breathing resistance, and all-day wearability—delivering dependable protection in the most demanding environments.

Group of workers in a warehouse wearing safety gear and RZ Pro FFP3 Masks.

CE Marking & FFP3 Certification

Under EN 149:2001 + A1:2009, FFP3 respirators must pass rigorous total inward-leakage testing on 10 different wearers to verify a secure, reliable seal across a range of face shapes—at the strictest leakage limits in the standard. The RZ Pro FFP3 Respirator is built to meet that bar with a precision-fit design and enhanced comfort nose foam that helps reduce leaks and directs airflow through the filter. A soft, breathable inner lining keeps the seal comfortable for long wear, while the contoured nose area helps minimize glasses fogging when properly fitted.

RZ Pro respirator mask with labeled features including adjustable straps, mesh shell, nose piece, and active carbon filter.

Key Features:

Adjustable Elastic Straps: Customizable fit for all face shapes.

Anti-Slip Top Strap: Secure and comfortable wear.

Extra-Wide Lower Strap: Reduced neck strain for all-day comfort.

Soft Nose Foam: Gentle on the skin and prevents discomfort.

360-Degree Seal: Ensures optimal protection and minimizes leakage.

Low Breathing Resistance: Easy breathing, even during intense activity.

Quick and Easy Filter Replacement: Hassle-free maintenance, filters snap in and snap out in seconds!

Replacement filters: Use the RZ Pro FFP3 replacement filters identified for this configuration. Standard RZM3 F3 filters are not the same product as FFP3 replacement filters.

Man wearing a black shirt, cap, and dust mask working on a wooden surface.

All Day Comfort

The RZ Pro FFP3 Respirator combines a secure 360° seal with adjustable straps and soft nose foam for a comfortable, personalized fit that reduces leaks and fatigue. Built to EN 149 standards, it delivers reliable FFP3 filtration with low breathing resistance for all-day wear.

Don't Settle for Rubber Bands

Traditional disposable FFP respirators rely on flimsy straps and stiff paper shells that dig into your ears, slip out of place, and rarely seal well—so you’re left adjusting all day and tossing them after a single shift. The RZ Pro FFP3 is a better, more sustainable solution: a durable, reusable respirator with a comfortable, secure fit and replaceable high-performance filters. Its expansive filter area delivers reliable FFP3 protection with easy breathing, and because you only replace the filters—not the entire respirator—you cut waste and lower your long-term cost without compromising comfort or safety.

RZ Pro FFP3 Filtration

FFP3 is Europe’s highest respiratory protection standard under EN 149:2001 + A1:2009, requiring a minimum 99% filtration efficiency against airborne particulates. The RZ Pro FFP3 Respirator meets this rigorous benchmark, delivering high-level protection for extremely fine dusts and aerosols—down to 0.3 microns, a particle size widely used for worst-case filtration testing. To put that in perspective, a human hair is roughly 50–100 microns in diameter, so 0.3-micron particles are about 200–300× smaller than a single hair. In short, the RZ Pro FFP3 is engineered to stop particles far finer than what the eye can see—so you get maximum certified protection without sacrificing comfort or breathability.

Technical Resources

Product Brochure

Our RZ Pro FFP3 Product Brochure provides an at-a-glance overview of the respirator’s purpose, certified performance, and key design benefits. It highlights what makes the RZ Pro respirator unique—including its lightweight construction, all-day comfort features, replaceable filtration system, and intended applications—while summarizing the standards it meets and the protection level you can expect. Whether you’re a safety manager, distributor, or end user, this brochure is the simplest way to understand how the RZ Pro FFP3 Respirator works, where it excels, and why it’s trusted for daily particulate protection.

Download RZ Pro FFP3 Product Brochure

Module B Certificate

The EU Type-Examination (Module B) Certificate is a key part of what makes an FFP3 respirator legitimately certified for use in Europe. Under the EU PPE Regulation (EU) 2016/425, a notified third-party testing body reviews the respirator’s technical design and verifies—through EN 149 testing—that it meets the strict safety, fit, and filtration requirements for FFP3-level protection. Once approved, the notified body issues a Module B certificate confirming the product conforms to the essential health and safety standards and is eligible to carry CE marking as an FFP3 respirator. In short, this certificate is official proof that the RZ Pro FFP3 Respirator’s design and performance have been independently validated to Europe’s highest respiratory protection standard.

Download Module B Certificate

Module D Certificate

The Module D Certificate (Conformity to Type Based on Quality Assurance of the Production Process) confirms that the RZ Pro FFP3 Respirator is not only tested and approved at the design level (Module B), but also manufactured under an audited quality system that consistently produces respirators matching that approved design. Under the EU PPE Regulation (EU) 2016/425 for Category III protective equipment like respirators, a Notified Body reviews and verifies the factory’s production controls—covering procedures, inspections, and process traceability—to ensure ongoing compliance with EN 149 requirements. In simple terms, Module D is the “factory and production quality approval” that proves every respirator coming off the line is made to the same certified standard.

Download Module D Certificate

Technical Data Sheet

The RZ Pro FFP3 Technical Data Sheet is your quick-reference summary of the respirator’s certified performance, construction, and intended use. It confirms the RZ Pro meets EN 149:2001 + A1:2009 requirements for FFP3-level protection with CE marking under the EU PPE Regulation (EU) 2016/425, including notified-body oversight through Module B (EU type examination) and Module D (production quality assurance/monitoring). The sheet also outlines key design and material features—such as the respirator shell, valve system (if applicable), high-efficiency filter media, fit components, and strap configuration—along with proper fitting/use instructions and core test thresholds like inward leakage, filter penetration, and breathing resistance. In short, it provides a clear, third-party-aligned snapshot of what the RZ Pro FFP3 is built for: dependable protection against extremely fine airborne particulates in demanding work environments, at Europe’s highest filtering facepiece standard.

Download Technical Data Sheet

Join the RZ community

Be inspired. See how real people are using RZ, share your experience, and start connecting today!

@lukesliveedge

"My Go-to in the shop."

@honeybeezigns

"I'm a huge fan of RZ Mask, because of comfort and effectiveness."

@joshuataylorwoodworks

"the comfort, breathability, and protection are unmatched."

@foxridgeslabs

"By far the most comfortable masks i've worn."

FAQs

Please read our FAQs page to find out more.

What is your satisfaction guarantee?

We stand behind every RZ Mask with a 30-day satisfaction guarantee. Try it out for real-world use — if you’re not completely satisfied within 30 days of purchase, you can request a return and we’ll make it right.

How do I choose the right size?

Fit is everything for comfort and performance. Each product page includes a sizing guide, and our adjustable strap system plus flexible nose foam helps dial in a secure seal across a wide range of face shapes.

You can also view our sizing guide video here: Sizing & Fitting Guide

How long do RZ filters last?

The life expectancy of your RZ Filter depends on many variables, such as; particulate exposure density, particulate exposure duration, and user breathing rate.

Ultimately, filter life depends on your environment. Replace your filter when breathing becomes noticeably harder, the filter looks dirty, or after heavy-dust days.

What kinds of particles do RZ respirators help protect against?

RZ respirators are designed to help reduce exposure to airborne particulates like dust, pollen, smoke, and other jobsite or everyday nuisance particles. Different models/filters have different performance levels, so check the product’s certification or filter spec for exact use-cases.

How fast is shipping, and what are your return rules?

Shipping times and costs are shown at checkout, and free-shipping thresholds may apply depending on your region. If you need to return an order, you can start the process through our Returns page found in the website footer.

Didn’t find your answer?

Don't hestitate to contact us

100% Satisfaction Guarantee

Connect with the right team

Talk to RZ Sales

Choose the right team

Customer service and sales use separate forms so your request reaches the right place.