
A fit you can adjust
Adjust the head and neck straps and nose area for your fit. Follow your model’s fitting and seal-check instructions before starting work.
RZ Pro · FFP2
A reusable mesh housing. Replaceable particle filters. Explore the CE-certified FFP2 configuration, adjust the fit, and choose matching replacements.


Adjust the head and neck straps and nose area for your fit. Follow your model’s fitting and seal-check instructions before starting work.

Keep the housing while it remains serviceable and replace the matching RZ Pro FFP2 filters as directed. Choose filters with or without activated carbon.

RZ SECURE 360 SEAL®
Warm air escaping at the top can fog lenses. Adjust the RZ Pro nose area and straps using your model’s fitting instructions. Check the setup with your own eyewear before starting.
How to fit your eyewear →Illustration of eyewear fogging, not a comparative respiratory-protection test. Fogging varies with fit, eyewear, and conditions. Clear lenses do not prove an adequate seal.
Step 1
Review the configuration, price and availability below before adding it to your cart.




Step 2 · Optional
Choose the FFP2 five-pack for your RZ Pro configuration. Filters shown here are sold separately. Do not substitute RZM3 F2 or F3 filters.


Step 3 · Optional
Choose recurring filter delivery instead of a one-time pack. Your respirator is purchased separately in Step 1.

RZ Pro FFP2
Five replacement filters per pack. Match the model and size before ordering.

RZ Pro FFP2
Five replacement filters per pack. Match the model and size before ordering.

RZ since 2010
RZ began in 2010 when founder Steve Torbenson set out to make a mask people would actually want to wear. Feedback from riders, makers, and tradespeople has shaped the designs since.
Meet RZ →Buy with confidence
If your mask is not right for you, contact us and we will help make it right. See the return terms.

RZ Pro pairs a reusable mesh housing with replaceable filters. This page offers the FFP2 configuration and its matching five-pack refills, with or without activated carbon. Keep the housing and replace the filter as directed in the supplied instructions.
The FFP2 NR designation applies to the filtering configuration. Follow the single-use limits in its instructions; a reusable outer housing does not make an NR filter reusable.

RZ Pro FFP2 is presented in the linked technical data sheet as a CE-marked FFP2 NR particle-filtering respirator under EN 149:2001+A1:2009 and the EU PPE Regulation (EU) 2016/425. Match the model marking on your respirator to its certificate and supplied instructions.
FFP2 is one of the three EN 149 filtering-facepiece classes. At least 94% particle filtration under EN 149 laboratory test conditions. This classification also sets limits for inward leakage and breathing resistance. Correct fit remains essential.
View Module B certificate →
View Module D certificate →
Module B covers EU type examination; Module D covers production quality assurance. CE marking does not establish US NIOSH approval. NR means single-shift use; follow the exact configuration’s instructions.

Adjust the head and neck straps for your fit, following the instructions for this model.
The top strap helps hold the housing in position. Check its placement before each use.
A wide lower strap spreads contact across the back of the neck. Adjust it without overtightening.
The nose foam and contoured interface support a comfortable fit. Check the seal according to the product instructions; fit is individual.
Breathing resistance, fit and comfort depend on the correct configuration and condition of the filter. Leave the exposure area if breathing becomes difficult.
Use the specified attachment points to remove and install matching RZ Pro FFP2 filters. Check the installed filter before use. RZM3 F2 and F3 filters are different products.
The one-way exhalation valve lets exhaled air leave the respirator. Keep it correctly installed and inspect it as directed before use.
RZ SECURE 360 SEAL®
The nose interface and adjustable head and neck straps work together to fit RZ Pro to your face. Put on your own eyewear and follow the fitting and seal-check instructions supplied with your model. Fogging varies with fit, eyewear and conditions. Clear lenses do not prove an adequate seal or verify respiratory protection.
Fit and eyewear guidance →

FFP2 is a classification under the European EN 149 standard. Its requirements address filter penetration, inward leakage and breathing resistance. Filtration and whole-respirator fit are different checks: a filter rating alone does not describe the protection a wearer receives.
Review the linked technical sheet and certificates for the exact model and configuration, applicable standard and limitations. European CE marking does not establish US NIOSH approval. Do not treat particle filtration as protection against gases or vapors, including when a filter contains activated carbon.
Do not use where the contaminant or exposure level is unknown, or in oxygen-deficient atmospheres. Have workplace hazards assessed and follow the FFP2 instructions before selecting and using this respirator.
Overview of the RZ range and product features. Confirm which model each section describes.
EU type-examination document. Check the model identifiers, scope and validity against the product you are buying.
Production quality-assurance document. Read it alongside the matching type-examination certificate.
Product construction, performance information and use guidance. The supplied user instructions govern fitting, use and replacement.

One RZ Pro FFP2 respirator, two replaceable FFP2 filters and a storage bag. Replacement five-packs and subscriptions are separate purchases.
Check the size offered in Step 1 and follow the RZ Pro fitting instructions. For workplace use, confirm required fit testing with your safety team.
Follow the FFP2 NR use limits and replacement instructions. Exposure, breathing rate and filter condition affect service life. Do not wash the filter. Replace it sooner if damaged, contaminated or difficult to breathe through, following the instructions.
Use only for the particulate applications permitted in the exact model’s documentation. Have workplace hazards assessed before choosing protection. This is not a gas or vapor respirator.
Remove the filter before cleaning the reusable housing. Follow the RZ Pro instructions for cleaning compatible components, drying and storage. Keep clean, dry components protected in the storage bag; do not reinstall a used filter beyond its permitted use.
See current shipping options, delivery estimates, return conditions and warranty terms before buying. Contact Support if you need help choosing the right product or starting a return.
Shipping policy · Returns policy · FAQs and warranty help · support@rzmask.com
Confirm the required approval, exact model, filter and fit requirements with your safety team. Activated carbon does not make this a gas or vapor respirator.
Check the model marking and filter part number before choosing replacements.
Check filter compatibility →Download the technical sheet and certificates for the model shown on your label.
Technical documents →Talk through product requirements, quantities and ongoing filter supply before you order.
Talk to SalesEXPLORE INDUSTRIES
Cutting and sanding can put fine dust into the air. Start with dust control, then choose protection around the task and your workplace requirements.
Review this industry →02Harvest, animal care, maintenance, and spraying can involve very different air concerns. Choose around the actual task, not simply the fact that you work on a farm.
Review this industry →03Give your safety team the product information it needs: current approvals, the exact configuration, fit requirements, and supporting documents.
Review this industry →04Tell RZ which department task you are considering and what standards apply. Product information must match the actual environment and required protection.
Review this industry →05Consider trail dust, fit, movement, and your other gear before choosing a mask. Learn how to identify the correct filter and care for the system.
Review this industry →06Explore guidance for dusty building tasks, mask fit, and filter care. Match protection to the materials and requirements of each job.
Review this industry →07From handling cartons to facility cleanup, start with the task. Review fit, filter compatibility, and your workplace protection requirements.
Review this industry →08Plan for maintenance and field work with guidance on fit and product selection. Check the hazards and required protection before starting.
Review this industry →09Explore guidance for grounds care, maintenance, and dusty cleanup tasks. Choose equipment around the job and your department’s requirements.
Review this industry →10Review fit, replacement filters, and care for maintenance work. Confirm the exact product configuration and protection required for each task.
Review this industry →11Find guidance for fleet, depot, and vehicle maintenance tasks. Review the work environment, fit, and filter options before choosing your equipment.
Review this industry →12Help your team compare product information, fit guidance, and purchasing options. Match equipment to department tasks and applicable requirements.
Review this industry →Connect with the right team
Customer service and sales use separate forms so your request reaches the right place.
Please complete the fields marked required. You can leave the others blank.
You can also email RZ Sales. No request has been submitted.
RZ will use your contact details and request to respond. Marketing emails are optional and require a separate signup or opt-in. Privacy policy.