A fit you can adjust
Set the nosepiece and straps with the gear you wear. A fit you can check makes it easier to get ready for your next suitable dust task. Follow the fit instructions.
Construction task guide
Start with the material and the task
Sanding drywall, cutting concrete and applying a coating can create different exposures. Identify the material, control exposure at the source and check with your safety lead about the protection the task requires.
Before choosing a mask. RZM3 is not NIOSH Approved. The F3 particulate filter is not designed for solvent vapor protection. Reduced odor does not show that a filter protects against gases or vapors.
Drywall and wood
Sanding joint compound and cutting wood create fine dust. Use controls suited to the material and tool, such as extraction at the work point where appropriate. Confirm whether the task requires an approved respirator.
Concrete, brick and masonry
Cutting, drilling or grinding silica-containing materials can release respirable silica dust. Check the task-specific controls and protection requirements before starting.
Paints, adhesives and roofing
Check the product safety data sheet for hazards from applying, spraying or heating the material. If the task involves vapors, ask your safety lead to specify the appropriate controls and protection.
Demolition and renovation
Identify old materials and coatings before disturbing them. If lead or asbestos may be present, confirm the applicable procedures with your safety lead before proceeding.
Heat, eyewear and fit
Check how your mask, glasses and other equipment fit together. Adjusting the nosepiece and straps as instructed can help reduce fogging. Fitting with glasses
Filters and crew setup
Keep correctly sized spare filters and clean storage available. Revisit the assessment if the tool, material or ventilation changes. Replace filters according to the instructions and conditions of use.
When the job requires respiratory protection
Ask your safety lead to select the exact configuration for the assessed exposure and workplace requirements. In the U.S., check the respiratory protection program and applicable OSHA requirements. In other markets, review the documentation for the exact configuration and local requirements before choosing.
Clearer glasses
The design helps reduce exhaled air rising toward lenses. Fit RZM3 with your own eyewear to help reduce fogging.
Replace filters, not the whole mask
Keep a serviceable shell and change matching F3 filters when the instructions and your conditions of use call for it.
See how it works
The details you feel on the job
A fit you can check, less fogging on your eyewear, and replaceable filters. Here is what to know before choosing your RZM3.
One mask. Choose your fit.
RZM3 offers a neck strap, head straps, or ear loops as wearing options. Choose one setup, shape the nosepiece, and check the fit with your own eyewear or gear. Follow the fit instructions each time.
- Neck strap
- Head straps
- Ear loops
Keep your focus on the work
Warm air escaping at the top can fog lenses. Setting the nosepiece and nose foam helps limit that escape; the valves direct exhaled air away from lenses. Check the setup with your own eyewear before starting.
Keep the mask. Refresh the filter.
RZM3 comes with two F3 filters. When it is time to change them, keep the shell if it remains serviceable and use matching F3 filters in the same size. Follow the RZM3 instructions to remove and install filters; do not wash used filters.
STEP 1
Choose your RZM3 mask
Choose your size and color and add your RZM3 mask to the cart. It arrives with two F3 filters. In Step 2, add a matching three-pack so your next set is ready when you need it.
RZM3 Reusable Dust Mask | 3-Strap Design & Replaceable Filters
$39.99 USD
Shipping calculated at checkout.
STEP 2 · OPTIONAL
Add extra RZM3 F3 filters
Your mask includes two F3 filters. Add a matching three-pack now so you have replacements on hand before the included filters need changing. Choose the same filter size as your mask, then add the pack to your cart. Prefer automatic delivery? Step 3 is below.
RZM3 F3 replacement filters · 3-pack
$14.99 USD
Shipping calculated at checkout.
STEP 3 · OPTIONAL
Keep fresh filters on the way
The worst time to realize you are out of filters is when you are ready to work. Choose a schedule that fits your use, and let fresh RZM3 F3 filters come to your door automatically. Save 10% on each recurring pack.
RZM3 F3 FILTER REFILLS
One less thing to remember.
Have a fresh three pack on its way before your filter supply becomes a last minute problem. Match your mask size and choose a schedule based on how quickly you use your filters.
RZ since 2010
Built for people who keep going
RZ began in 2010 when founder Steve Torbenson set out to make a mask people would actually want to wear. Feedback from riders, makers, and tradespeople has shaped the designs since. Meet RZ.
RZM3 brings that idea together in a reusable mask: an adjustable fit, three strap options, and replaceable F3 filters.
Your RZM3 kit
Set up for the next task
The mask kit includes two F3 filters and three strap options. Choose your size and color, then add an optional pack of correctly sized replacement filters. You can also review filter subscription options in the buying steps above.
Fit, shell condition, and filter replacement matter each time you use it. Follow the instructions supplied with your product.
Choose your RZM3 →Keep exploring
One RZM3. More ways to use it.
These guides show other tasks you may be considering RZM3 for. Check suitability, fit, and requirements for each use.
RZM3 mask questions
How do I choose my size?
Measure your face and use the measurement instructions and RZM3 size guide. Check your fit before use. Choose your size in Step 1; matching filter options follow below.
How do I adjust it with glasses?
Shape the nosepiece and adjust the straps with your usual eyewear. See the glasses adjustment guide. Proper adjustment can help reduce fogging.
Which tasks suit RZM3?
Select equipment for the material and task, follow product instructions and check workplace requirements. Particulate filters do not establish protection against gases or vapors. For spray finishing, chemical vapors or work requiring an approved respirator, follow the protection specified by your safety program.
How do I keep replacement filters ready?
Your mask includes two F3 filters. Step 2 offers an optional matching three-pack; Step 3 offers scheduled refills. Inspect and replace filters according to the instructions and your conditions of use. Do not wash used filters.