RZ Pro Mask Challenge: No-obligation trial for companies to experience the RZ difference. Apply Today

Respiratory Protection for Health Care General Facility Use | RZ Mask

Respiratory Protection for Health Care

RZ Mask Solutions for Health Care Facility Maintenance, Renovation, and General Non-Clinical Use

Best for general facility use: RZM3 Three-Strap Reusable Mask — fine particle filtration to 0.1 micron, active carbon for organic odors, dual discharge valves for all-day breathability during facility maintenance and renovation operations.

Critical compliance notice: The RZM3 is a premium reusable mask for general particulate filtration — not a NIOSH-certified respirator, not a medical device, and not designed or approved for clinical use, patient care, infection control, or any health care environment requiring certified respiratory protection. It does not prevent disease transmission or provide protection against biological hazards. For all clinical, patient care, and regulated health care respiratory protection requirements, use the appropriate certified and approved respiratory protection per CDC, OSHA, and applicable health care standards. Consult your facility’s infection control and safety officers.


Where RZM3 May Be Appropriate in Health Care Settings

The RZM3 is designed for general particulate filtration in non-clinical, non-regulated environments. In health care settings, this may include:

  • Facility maintenance and renovation — general construction dust, drywall dust, and renovation particulates during facility maintenance and improvement projects in non-patient areas
  • Grounds and outdoor maintenance — general dust and pollen during outdoor grounds maintenance at health care facilities
  • Non-clinical support operations — general particulate exposure for facilities, engineering, and support staff in non-clinical areas
  • General air quality comfort — general particulate filtration for non-clinical staff in facility environments with general dust exposure

Where Certified Respiratory Protection Is Required

Certified respiratory protection is required for all clinical, patient care, and regulated health care environments — the RZM3 does not satisfy these requirements:

  • Patient care environments — appropriate certified respiratory protection per CDC and OSHA guidelines
  • Airborne infection isolation — NIOSH-certified N95 or higher per CDC guidelines
  • Surgical environments — appropriate surgical masks or respirators per facility and regulatory standards
  • Hazardous drug handling — appropriate certified respiratory protection per USP and OSHA standards
  • Any environment with biological hazard exposure — consult your infection control and safety officers

Recommended RZ Mask Products for Health Care Facility Use

Best for Facility Maintenance and Renovation Dust: RZM3 + F1 Active Carbon Filter

Fine particle filtration for construction dust, drywall dust, and renovation particulates during facility maintenance in non-patient areas. All-day breathability for maintenance staff.

For Europe and UK Health Care Facility Use: RZ Pro FFP2 or RZ Pro FFP3

CE-certified respiratory protection under EN149 for health care facility environments in Europe and the UK where certified protection is required for general facility maintenance use.


Choose Your Mask: Health Care

Use Case Common Concern Recommended Product Why It Fits Compliance Note
Facility maintenance and renovation (non-patient areas) Construction dust, renovation particulates RZM3 + F1 Filter Fine particle filtration, all-day breathability General use only; non-clinical environments only
Grounds and outdoor maintenance General dust and pollen RZM3 + F1 Filter Breathable for outdoor physical work General use only; not a medical device
Clinical and patient care environments Biological hazard, infection control Certified respirator required RZM3 not designed for clinical use CDC/OSHA certified respiratory protection required
Airborne infection isolation Airborne pathogen exposure NIOSH N95 or higher required RZM3 does not satisfy CDC/OSHA requirements NIOSH-certified N95 minimum per CDC guidelines
Europe/UK health care facility Certified protection required RZ Pro FFP2 or FFP3 CE-certified EN149 respiratory protection Verify regulatory and facility requirements

Frequently Asked Questions: Health Care Respiratory Protection

Can health care workers use the RZM3?

The RZM3 is appropriate for general facility maintenance and non-clinical support use only. It is not designed or approved for clinical use, patient care, infection control, or any health care environment requiring certified respiratory protection. Consult your facility’s infection control and safety officers for all clinical respiratory protection requirements.

Does the RZM3 prevent disease transmission?

No. The RZM3 is a general particulate filtration mask and is not designed, tested, or approved to prevent disease transmission or provide protection against biological hazards. It is not a medical device.

What respiratory protection is required for patient care?

Patient care respiratory protection requirements vary by environment and exposure. Consult your facility’s infection control officer and applicable CDC and OSHA guidelines for your specific patient care environment.


RZM3 is a premium reusable mask for general particulate filtration. Not a NIOSH-certified respirator. Not a medical device. Not designed or approved for clinical use, patient care, infection control, or biological hazard protection. For all clinical and regulated health care respiratory protection requirements, consult your facility’s infection control and safety officers and use the appropriate certified respiratory protection per CDC, OSHA, and applicable health care standards.

M1 Neoprene Mask Material Composition:Mask Shell: Neoprene
Nose Clip: High Tensile Steel
Filters: Standard F1 Active Carbon Filter
Valves: Acrylonitrile Butadiene Styrene (ABS)
RZ Masks are BPA free and lead free

M2 Mesh Mask Material Composition:Mask Shell: Nylon Mesh
Nose Clip: High Tensile Steel
Filters: Standard F1 Active Carbon Filter
Valves: Acrylonitrile Butadiene Styrene (ABS)
RZ Masks are BPA free and lead free

M2 Nylon Mask Material Composition:Mask Shell: Nylon
Nose Clip: High Tensile Steel
Filters: Standard F1 Active Carbon Filter
Valves: Acrylonitrile Butadiene Styrene (ABS)
RZ Masks are BPA free and lead free

M2.5 Mesh Mask Material Composition:Mask Shell: Nylon Mesh
Nose Clip: High Tensile Steel
Filters: Standard F1 Active Carbon Filter
Valves: Acrylonitrile Butadiene Styrene (ABS)
RZ Masks are BPA free and lead free

TECHNICAL INFORMATION FOR RZ FILTERS

According to latex particle challenge tests performed by the world renowned, Nelson Laboratories in Salt Lake City, RZ Mask's F1 and F3 Filters, filter 99.9% of all particulates to a size of .1 um.

F1 Standard + Active Carbon Filter:
Made with 2 layers of particulate filters
Outer layer filters particulates down to .1 micron in size
Inner Active Carbon layer effective towards fumes and odors
Laboratory tested to be 99.9% effective
Common uses: Low intensity, dust/fumes/odors/smoke/pollen

F3 High Airflow + Active Carbon Filter:
Made with 2 layers of particulate filters
Outer layer filters particulates down to .1 micron in size
Inner Active Carbon layer effective towards fumes and odors
Laboratory tested to be 99.9% effective
Promotes 40% better breathability than our standard F1 filter
The RZ F3 Filter is above general inhalation standards
Common uses: High intensity, Dust/pollen/smoke/fumes/odors

COPIES OF TEST RESULTS AVAILABLE UPON REQUEST. PLEASE CONTACT SUPPORT@RZMASK.COM.