Woodworking Dust Mask: Find Your RZM3 Fit
Still adjusting your dust mask between cuts? Meet the RZM3, a reusable woodworking dust mask with an adjustable nose clip, three wearing options, and replaceable filters. Explore the fit with your safety glasses, see what comes in the kit, and choose the size and color that work for you.
Choose your RZM3 Get sizing help
Know before you choose: RZM3 is a reusable particulate mask, not a NIOSH approved respirator. It is not for gases, vapors, finishing fumes, oxygen deficient atmospheres, or any task that requires a NIOSH approved respirator. Workplace suitability is determined by your employer or safety personnel.
Keep working through the cut instead of stopping to readjust your mask. Check your own fit and eyewear combination before use.
Keep the mask. Change the filters.
Replace the matching filter when required by the product instructions and conditions of use; the reusable shell stays with you.
RZM3 reusable mask
Current listed price: $39.99 USD. Choose your size and color in the selector below. The current product listing includes one RZM3 mask, two F3 filters, and a storage bag. Check the selector below for the current price and available options.
See current price and choose your mask
Replacement filters are optional and sold separately. Match the filter to your exact RZM3 mask size. See RZM3 F3 filters or see RZM3 F2 filters. Check compatibility before adding extra filters.
Find your RZM3 fit for the shop.
Still adjusting your mask?
The adjustable nose clip and three wearing options let you position the mask for your face and activity. Check the fit with your safety glasses. If the glasses fog or the mask moves, stop and adjust it according to the instructions.
Tired of throwaway masks?
Clean the shell according to its care instructions and replace the filters when required by your use and conditions. Do not wash the filters. A replaceable filter system means you do not need to discard the whole mask each time a filter is changed.
See how the fit and filter system work.
Choose the head strap, neck loop, or ear loops for the way you work. Adjust the nose clip and follow the RZM3 sizing and fit guide before use. The shell can be cleaned according to its care instructions, while matching filters are replaced as directed.
Choose deliberately for the task.
Wood dust, MDF, reclaimed materials, coatings, and finishing products present different concerns. Dust collection, ventilation, material safety information, and suitable protective equipment all matter. Do not use a particulate mask as protection against gases or vapors. Review OSHA wood dust guidance and ask your safety officer about workplace requirements.
Three steps to your workshop setup.
- Check suitability and fit. Review the limitations above and use the RZM3 sizing guide.
- Choose your size and color. The RZM3 product selector shows current options and price; the full total is confirmed at checkout.
- Add extra filters only if needed. Confirm model and size before choosing compatible replacements. Shipping and taxes are confirmed at checkout. Review shipping and returns before ordering.
Common woodworking questions.
Will the RZM3 stop my safety glasses from fogging?
Fogging depends on fit, eyewear, movement, and conditions. Position the nose clip and mask as instructed, then check the combination with your own safety glasses. Do not treat any mask as a guarantee of clear eyewear in every situation.
Is the RZM3 a NIOSH approved respirator?
No. RZM3 is a reusable particulate mask. It is not a NIOSH approved respirator and must not be selected for a task requiring one. Review current product status and evidence.
Can I use it around stains, paints, or other finishing products?
Do not rely on RZM3 for gases, vapors, fumes, or chemical contaminants. Review the material safety information and the controls required for the specific job. A carbon layer intended for nuisance odors is not a chemical protection claim.
Which filter should I order?
Start with the filters included in the current mask package, then match any replacements to your exact mask model and size. Follow the product instructions for inspection and replacement. See filter compatibility.
Choose your RZM3